Share this
Snoop, SWAK, and Goop - the Best 'Complement' for Swagelok Products
by Katie Dennis on Tue, Nov 25, 2014 @ 13:11 PM
Helping you get maximum life from the parts you buy
To help you get top performance and long life from Swagelok products, Edmonton Valve & Fitting also carries a variety of complementary products, some with the unusual names of Snoop®, SWAK®, and Goop™.
![]() |
|
![]() |
|
With the help of products like Snoop and SWAK (pictured above), you get the most out of your Swagelok products. Download the catalogue for more information here. |
Snoop Leak Detector
Snoop is so popular as a leak detector that in some places the world it is used as a verb: "You'd better Snoop that fitting." The name is so familiar that some people don't even realize Swagelok makes it.
Snoop is made of deionized water and a surfactant, which makes it sound a lot like soapy water. It's actually much better. Soapy water might work if you have a large air leak or something with significant velocity.
"But if you are looking to find the very small leaks, this is the stuff you want to go with," says Chris Horne, one of our account managers. "It's amazing. You could be looking at a piece of tubing, you can't hear anything, you can't see anything, but this stuff will find it."
The Snoop formula dries clean without staining, and contains a corrosion inhibitor.
It works across a wide range of temperatures, –2°C to 93°C. For Alberta winters, we also have Real Cool Snoop, which works where ordinary leak detectors would freeze. Real Cool Snoop is good down to –54°C, even on very small leaks and vertical surfaces.
To help you get into hard-to-reach places, we'll include a flexible Snooper Tube.
SWAK and PTFE Tape Pipe Thread Sealant
Our SWAK pipe thread sealant cures to a bond that resists vibration and shock, yet it allows for low breakaway torque that makes it easy to break connections even after it's fully cured. If you don't want to use PTFE tape as a pipe thread sealant, SWAK is the way to go.
"The difference between pipe dope and pipe tape is often a case of personal preference," Horne says. "They both have very similar temperature ratings and applications, and can provide a reliable seal."
There are some fluids and materials that are not compatible with Swak, however.
Please contact your Swagelok representative to provide additional information on Thread Sealants.
Goop
Our Goop thread lubricants ease assembly of leak-tight connections for a variety of metals and alloys. Oil-based Silver Goop is the right choice for use on stainless steel and high-temperature alloys. Blue Goop is also oil based, and can be used on stainless steel, steel, titanium, aluminum, and nickel-based alloys. It contains PTFE and resists water washout.
Our third version is halocarbon-based Pure Goop, good for use on titanium, stainless steel, steel, and nickel-based alloys, but not on aluminum or magnesium threads.
Finally, there's Vac Goop, a Fluorosilicone-based thread lubricant for use on threads, O‑rings, gaskets, glass seals, and metal parts in vacuum systems.
To learn more about Goop, Snoop, and SWAK download the catalogue here.
Share this
- Fittings (82)
- Cost Savings (70)
- Valves (67)
- Fabrication (59)
- Services (41)
- Videos (33)
- Steam Systems (29)
- Training (27)
- Downloads (25)
- Resources (25)
- Sampling (24)
- Tubing (24)
- Field Advisors (18)
- Hoses (12)
- Oil & Gas (10)
- Regulators (9)
- Winterization (9)
- Gas Distribution (7)
- Hydrogen & Clean Energy (4)
- About Us (2)
- Measurement (2)
- February 2025 (1)
- November 2024 (1)
- October 2024 (2)
- August 2024 (1)
- July 2024 (1)
- June 2024 (4)
- April 2024 (4)
- March 2024 (2)
- January 2024 (3)
- December 2023 (2)
- November 2023 (3)
- October 2023 (2)
- September 2023 (3)
- August 2023 (3)
- July 2023 (3)
- June 2023 (2)
- May 2023 (4)
- April 2023 (2)
- March 2023 (2)
- February 2023 (3)
- January 2023 (2)
- December 2022 (1)
- November 2022 (1)
- October 2022 (2)
- September 2022 (5)
- August 2022 (3)
- July 2022 (6)
- June 2022 (4)
- May 2022 (3)
- April 2022 (1)
- March 2022 (2)
- February 2022 (3)
- January 2022 (4)
- December 2021 (4)
- November 2021 (6)
- October 2021 (3)
- September 2021 (5)
- August 2021 (9)
- July 2021 (5)
- June 2021 (7)
- May 2021 (7)
- April 2021 (4)
- March 2021 (3)
- February 2021 (3)
- January 2021 (2)
- December 2020 (3)
- November 2020 (3)
- October 2020 (2)
- September 2020 (3)
- August 2020 (3)
- July 2020 (3)
- June 2020 (3)
- May 2020 (3)
- April 2020 (2)
- March 2020 (3)
- February 2020 (3)
- January 2020 (3)
- December 2019 (2)
- November 2019 (3)
- October 2019 (3)
- September 2019 (2)
- August 2019 (3)
- July 2019 (2)
- June 2019 (2)
- May 2019 (3)
- April 2019 (3)
- March 2019 (3)
- February 2019 (2)
- January 2019 (3)
- December 2018 (2)
- November 2018 (2)
- October 2018 (4)
- September 2018 (2)
- August 2018 (3)
- July 2018 (3)
- June 2018 (2)
- May 2018 (4)
- April 2018 (3)
- March 2018 (3)
- February 2018 (3)
- January 2018 (4)
- December 2017 (1)
- November 2017 (4)
- October 2017 (4)
- September 2017 (4)
- August 2017 (5)
- July 2017 (3)
- June 2017 (4)
- May 2017 (4)
- April 2017 (3)
- March 2017 (5)
- February 2017 (4)
- January 2017 (4)
- December 2016 (3)
- November 2016 (3)
- October 2016 (4)
- September 2016 (3)
- August 2016 (4)
- July 2016 (2)
- June 2016 (2)
- May 2016 (2)
- April 2016 (4)
- March 2016 (2)
- February 2016 (3)
- January 2016 (4)
- December 2015 (4)
- November 2015 (4)
- October 2015 (5)
- September 2015 (2)
- August 2015 (4)
- July 2015 (5)
- June 2015 (2)
- May 2015 (3)
- April 2015 (5)
- March 2015 (3)
- February 2015 (4)
- January 2015 (3)
- December 2014 (5)
- November 2014 (4)
- October 2014 (4)
- September 2014 (4)
- August 2014 (4)
- July 2014 (5)
- June 2014 (4)
- May 2014 (4)
- April 2014 (5)
- March 2014 (4)
- February 2014 (4)
- January 2014 (4)
- December 2013 (3)
- November 2013 (4)
- October 2013 (5)
- September 2013 (4)
- August 2013 (5)
- July 2013 (4)
- June 2013 (3)
- May 2013 (4)
- April 2013 (5)
- March 2013 (2)
- February 2013 (3)
- January 2013 (5)
- December 2012 (3)
- November 2012 (3)
- October 2012 (5)
- September 2012 (3)
- August 2012 (4)
- July 2012 (4)
- June 2012 (1)